I started in Reprap in 2011...frequently spoke with Prusa and many, many others in IRC. Watched the development and commercialization of the whole project through the years.
My main takeaway (and one that I attempted to point out often) is that the value of the Reprap project and it's OSHW nature was not to "own a machine"...the true value was the process of building the machine, tuning and evolving. This all began to stagnate in 2014 when the "You are a fool to build your own printer when you can buy one prebuilt" came about. This seemed to be spread by people who either had no idea what they were doing...or were intentionally planting the seed of doubt. We were told that it was better/easier to buy 10 and throw away 5 in a year since it was more cost effective.
My current printer I built in 2015. It needs very little work but has evolved slightly through the years...mostly in electronics since it is my test platform for the V2 Smoothieboard development. It does not have a lot of the software "magic tricks" but it prints very reliably and solid (even after being toted around to events).
It was once said to me by Logxen "Opensource hardware is engineering on an artist's business model". IMHO...saying it is dead and giving up is the same as quitting doing art you love because someone else paints better/faster/cheaper.
A quote attributed to Limor Fried says it best "I'm going to keep shipping open source hardware while you all argue about it".
@josefprusa...since I know you frequent here...don't forget about the impact the projects have on the world. There are bigger things than just money. There was a time you cared about OSHW enough to get it tattooed on your arm.
> My current printer I built in 2015. It needs very little work but has evolved slightly through the years...
"It needs very little work" is very different from "an amateur with no knowledge can use it". You're overwhelmingly more qualified to adjust it and keep it running, you even enjoy that part of the process.
I've come to accept that an overwhelming majority of people are not 3D printER enthusiasts, they're barely even 3D printING enthusiasts. They're artists and minifigure builders and engineers and mechanics, and they care about the printer itself just as much as they care about a random screwdriver. Many don't even want to understand how the thing works, they just want it to work.
With those values, yes, buying one off the shelf that's assembled and tuned and adjusted and tested and can immediately begin making parts with decent reliability is better than building one.
> "You are a fool to build your own printer when you can buy one prebuilt" came about. This seemed to be spread by people who either had no idea what they were doing...or were intentionally planting the seed of doubt.
I started with a self-built printer and even got some key parts from members of our local 3D printing community, true RepRap style. I've spent a lot of time upgrading, modifying, tuning, debugging, and trying different controller boards over the years.
I also have a mass-produced printer.
I enjoy both for different reasons. I would never recommend the self-built route to anyone who wasn't looking for a project. The mass-produced printers are so much easier to get to printing rather than spending hours dealing with the printer every time you want to print.
Honestly, getting the mass-produced printer reignited my excitement for actually designing and printing parts. Instead of dealing with the printer, I can forget about the printer and just get straight to my project.
> We were told that it was better/easier to buy 10 and throw away 5 in a year since it was more cost effective.
This is the FUD I hear out of the 3D printing purists, but it doesn't match the experience of myself and my friends with printers from Bambu and a couple other companies.
I can get spare parts for both printers just as easily. To be honest, I have more faith that I can get something like a replacement heated bed for my Bambu 5 years from now than the custom-shaped heater for self-built which is sourced from a little operation that has to carry dozens of different sizes and variations.
Every time I read one of these posts praising self-built printers and downplaying the mass-produced machines, it comes down to something like this:
> My current printer I built in 2015.
I have a self-built printer from that era that has been upgraded throughout the years. I also have a Bambu. It's hard to explain just how much you're missing if you don't have experience with both.
It's nice to have a (niche) community around open source HW, but I'd argue it's even better when that community's ideals and ethics can spread to more people through OSHW business, not to mention the benefits flowing back to the community like e.g. cheaper parts.
No one's taking away the community right now, but if the business around it is disappearing, that's also a shame.
My main takeaway (and one that I attempted to point out often) is that the value of the Reprap project and it's OSHW nature was not to "own a machine"...the true value was the process of building the machine, tuning and evolving. This all began to stagnate in 2014 when the "You are a fool to build your own printer when you can buy one prebuilt" came about. This seemed to be spread by people who either had no idea what they were doing...or were intentionally planting the seed of doubt. We were told that it was better/easier to buy 10 and throw away 5 in a year since it was more cost effective.
My current printer I built in 2015. It needs very little work but has evolved slightly through the years...mostly in electronics since it is my test platform for the V2 Smoothieboard development. It does not have a lot of the software "magic tricks" but it prints very reliably and solid (even after being toted around to events).
It was once said to me by Logxen "Opensource hardware is engineering on an artist's business model". IMHO...saying it is dead and giving up is the same as quitting doing art you love because someone else paints better/faster/cheaper.
A quote attributed to Limor Fried says it best "I'm going to keep shipping open source hardware while you all argue about it".
@josefprusa...since I know you frequent here...don't forget about the impact the projects have on the world. There are bigger things than just money. There was a time you cared about OSHW enough to get it tattooed on your arm.
edit: grammar